How long does a campervan carpentry job take?

It depends on the scope. A bespoke kitchen on its own is quicker than a full interior fit-out. After an initial discussion I can give you a realistic timeline at estimate stage.

Where is JW Camper Carpentry based?

I am based in Horsham, West Sussex, United Kingdom. Within easy reach of Brighton, London and most of the south coast.

How much does bespoke campervan carpentry cost?

Every job is different so prices vary with the scope, materials and how much carpentry is involved. After I understand what you need I will put together a clear estimate up front with no hidden extras.

Can I bring my own design ideas?

Yes — that is exactly how a bespoke job works. Bring sketches, photos or Pinterest boards. I can offer practical advice on the design, layout and materials based on what you want and how you plan to use your van. This is practical guidance, not a full design or 3D drawing service.

What vans do you work on?

I have worked on Fiat Ducato, Citroën Relay, Peugeot Boxer, Mercedes Sprinter, Ford Transit, VW Crafter and similar large panel vans. Smaller bases including VW Transporter and Ford Custom are also catered for.

Do you handle electrics, gas and plumbing?

No — I focus on carpentry and woodwork installation. Customers normally have a self-build project already underway and bring me in for the carpentry side: ply-lining, kitchens, beds, bathrooms, storage and cabinetry. Electrics, gas and plumbing are handled by the customer or their own specialists.

Do you do start-to-finish van builds?

No. Most of my work is partial conversions — joining existing self-build projects to handle the woodwork side. That might be a kitchen, beds, ply-lining, bathroom carpentry, storage, or finishing off the interior of a build that is already underway.

Can you build trailers and teardrop campers?

Yes. I have built custom teardrop trailers from scratch and can do carpentry work on existing trailer projects too.

West Sussex · Horsham

Campervan Carpentry.

I specialise in bespoke woodwork installation on existing self-build projects. Custom van interiors using plywood, real wood and reclaimed wood for extra character.

Ply-lining, kitchens, beds, bathrooms — all built to your requirements. I am happy to use products that you may already have.

LATEST SHORT

SHORTS

FROM YOUTUBE

SHORTS

Watch the channel on YouTube

Hand-built carpentry

Based in Horsham

Real wood finishes

Bespoke interiors

Hand-built

Carpentry

Real wood

Finishes

Bespoke

Interiors

Horsham

West Sussex

What I build.

Carpentry, cabinetry and woodwork on existing campervan projects — kitchens, beds, bathrooms, storage. Real wood, properly joined. Read recent reviews →

Partial conversions

Carpentry and woodwork on existing self-build projects. I slot in to handle the joinery side of your build.

Kitchens & joinery

Bespoke cabinets, worktops, sinks. Plywood and real wood, designed to maximise every inch.

Sliding, fixed & sofa beds

Sliding beds, fixed beds and sofa beds — built from real wood and ply.

Bathrooms

Bathrooms cladded and sealed with hygienic cladding, built around the layout and requirements of your van.

Ply-lining & cladding

Ply walls, tongue-and-groove cladding, vinyl flooring, timber finishes — for character and durability.

Practical advice

I can offer advice on your design, layout and materials, helping you think through what will work best before the carpentry starts. This is practical guidance based on experience, not a full design or 3D drawing service.

Recent work

Latest projects.

See all carpentry →

Reclaimed pallet wood and bare ply. The ply can be painted to the customers taste

Ready for painting as required

Campervan kitchen carpentry with teal worktop and herringbone floor

Sliding door to cab area

Plywood cupboards

Birchwood campervan cupboards — finished interior carpentry

Birchwood cupboards

Bespoke campervan kitchen unit with hob built in the workshop

Bespoke kitchen unit

Full size double sliding bed

Plywood cupboards and sofa carpentry inside a campervan

Cupboards & sofabed

Painted ply

The process · Seven stages

How a build comes together.

Most customers already have a van or self-build project underway and need help completing the carpentry or interior fit-out. Every project is different, so these seven stages flex to suit the condition of your van and what you have already done.

01

Stage one

Contact

You get in touch because you have a van or self-build project underway and need help moving it forward. You may have run out of time, tools, confidence, skills, or simply want the carpentry finished properly.
02

Stage two

Discussion

You share photos and videos of your van, along with a rough drawing and a list of what you would like doing. This helps me understand the space, the stage your project is at, and what needs to be built.
03

Stage three

Estimate

Based on the photos, videos, drawings and details supplied, I provide an estimated cost and timescale for the work. This gives you a clear idea of what is involved before the project moves forward.
04

Stage four

Preparation for interior

Before interior carpentry commences, windows, skylights, insulation and wiring are carried out. This preparation stage is typically completed by the customer or other professionals, but I can offer advice on this if required.
05

Stage five

Battening, pillars & lining preparation

Walls and ceilings are battened out in preparation for furniture fixing points. Door pillars are clad with carpet before the ceiling and walls are lined with either ply or wood cladding, leaving a blank canvas. Doors are also covered at this stage.
06

Stage six

Cabinetry

This is the main carpentry stage. Using quality ply, real birch timber and spruce, the interior pieces are hand-cut, joined, treated and installed. This can include kitchen units, bed frames, storage, wardrobes, cupboards and other custom woodwork built around your van and your requirements.
07

Stage seven · Handover

Final fit out

The final fit-out can include items such as the hob, sink, fridge, door handles and catches. Once the carpentry and fitting work is complete, the van can be handed back to you for upholstery, staining and painting. A separate painting service can be included if required.
Talk to Jason

— 01

Authentic, original work.

No off-the-shelf templates. Every job is designed and built from scratch around how you'll actually use your van.

— 02

A home from home.

A campervan should feel practical, comfortable, personal — and suited to your needs and how you travel. Custom woodwork, storage, beds, kitchens and layout choices, all built to your requirements.

Comments from Facebook & YouTube.

All comments →

"Looks fantastic, the owner will be proud of this one 👍"

Simon Sennett

Facebook · Comment

"Epic job Jason! ❤️❤️❤️"

Paul Cooper

Facebook · Comment

Latest projects.

Bea — Mercedes Sprinter L3H2

Birch ply interior carpentry with herringbone floor. Returned to customer to paint and upholster. Tap to view the build photos on Facebook.

View on Facebook ↗

Finished teardrop trailer by JW Camper Carpentry — hand-built custom teardrop caravan

Facebook

JW Camper Carpentry · Teardrops album

Teardrop caravans

I have in the past built 2 Teardrop Caravans from scratch. They make a great second bedroom for campers! I am not offering this service anymore. Tap to view the full album.

View on Facebook ↗

Facebook

JW Camper Carpentry

Godfrey — Fiat Ducato L2H2

Made from solid birch timber and ply. Godfrey was rented out for a year on Quirky Campers where he got 5 star reviews. Tap to view on Facebook. Quirky link on the bottom of the page.

View on Facebook ↗